TREP01 flow control handle allows transferring of various liquids without spilling and controls the amount of liquid that is dispensed.
Specifications
- Power: Two (D) Batteries, Sold Separately
- Flow Rate: 2.5 Gallons per Minute
- Suction Tube: 15 inch
- Discharge Hose: 3.28 ft.
- Compatible Liquids: Gasoline, E15, E85 (Remove pump after use, E85 may corrode seals), diesel, DEF (AdBlue), non-potable water, kerosene, antifreeze, windshield washer fluid, mild detergents, agricultural chemicals & light oils
Flow Control Nozzle
- Control the rate of liquid at any moment by squeezing the Nozzle lever
- Upper lever position for watering
- Lower lever position for refueling
- Can be locked for longer watering sessions
CSA Certified
- The TREP01 is officially certified and rigorously tested by the CSA group
- This assures that our product's handling of electronics and gasoline are absolutely safe to use according to the high standards of ANSI, UL, CSA and NSF
Suction Tube
- Adjustable Length: 15 inch
- Fits on 3 Gallon to 6 Gallon gas cans to 5 gallon pails
- Suction end Outer Diameter: 1.2 inch
Swivel Nut Nozzle
- Nozzle connection can perform a 360 degree rotation to prevent hose from tangling
Incompatible
- Thinners or solvents, hot water, drinking water, acetone, benzene, creosol, phenol, methyl ethyl, concentrated caustic liquid soda, nitric acid, hydrochloric acid, sulfuric acid, etc.
What's Included
- Transfer Pump, Nozzle & Manual
Installation kit
An installation kit is needed for proper installation on your vehicle
Installion Kit Available
Choose your vehicle
Vehicle |
|
|